S&B PRODUCT WARRANTY
Million Mile Limited Warranty.
S&B air filters and intake kits purchased from Authorized Dealers are backed by S&B’s Million
Mile Limited Warranty when used under typical driving conditions and on vehicles for which they
were designed. If one of our products is not performing properly or is defective, S&B will replace
What is not covered by the S&B Warranty.
If you use an S&B product for (1) any type of racing or competitive event (2) any off-road use,
(3) custom or modified product, (4) any industrial or marine applications, and/or (5) any illegal
highway use. If an S&B product is not covered by our million mile warranty, our products are still
warranted against manufacturing defects for one year from the date of purchase. Only product purchased from
an Authorized Dealer is covered by the S&B warranty.
Warranty for Intake Elbows.
The warranty period for S&B Intake Elbows is 5-Years. Returns are not accepted once the parts
have been installed.
S&B DOES NOT RECOMMEND NOR DOES THE WARRANTY COVER CONDITIONS
WHERE THE INTAKE ELBOW IS EXPOSED TO INTERNAL PRESSURE IN EXCESS OF 75
POUNDS PER SQUARE INCH (PSI). Visit www.sbfilters.com for actual burst test results.
Exposing the Intake Elbow to pressures in excess of 75 PSI could cause the Intake Elbow to
leak and/or rupture causing severe damage to your vehicle and/or serious bodily harm including
death. Never run more than 5 PSI of pressure through the Intake Elbow with your hood raised.
Special care should be taken when running a vehicle on a dyno to protect all personnel from
flying debris in the event of a rupture of the part.
Replacement of Product.
In order to return any product to S&B, an RMA number must be issued. Customer must supply
proof of purchase and product must be sent back at customer’s cost.
Extent of Warranty.
If a defective product is properly returned to S&B, it will be replaced. S&B reserves the right to
decide as to if the terms of the warranty outlined above have been followed properly. Should
S&B decide that the terms of the warranty do not apply, S&B will under no obligation to honor
this warranty. Under no condition shall S&B be responsible for any contingent, special,
consequential, indirect or other damages.
S&B ENGINE PROTECTION
Your Vehicle’s Warranty is Safe!
S&B commits that our customers will not be charged for a repair due to the manufacturer
denying their warranty claim because of the presence of an S&B intake kit or OE replacement
filter. We warrant that using an S&B intake kit or OE filter will not result in the denial of your
The original purchaser of the vehicle and S&B product is covered by the S&B warranty against
any engine damage incurred as a direct result of using a properly installed S&B
product on the specific vehicle that its use was intended. Included in this warranty are
reasonable vehicle repair costs directly related to the engine damage caused by the failure of
the S&B intake kit or OE replacement filter. S&B will not be responsible for any consequential,
indirect, contingent, special or other damages not outlined in this warranty.
In order to be eligible for our Engine Protection Limited Warranty, you must properly maintain your cleanable filter by using a Precision Cleaning & Oiling Kit. The correct amount of oil must be applied to the filter after cleaning in order for it to perform properly and be eligible for this warranty protection. You may be asked to provide evidence that you utilized our Precision Cleaning Kit. If you can't provide this evidence, S&B will either deny your warranty request or have you send in your filter for testing. Upon receipt of your filter, S&B will service it and test it on our ISO 5011 Test Stand. If S&B deems the filter is performing properly, your warranty request will be denied. The bottom line is that if you service your filter properly, S&B will stand behind you.
What if I am not the original owner of my vehicle or if I had a competitors intake/filter
If you are not the original owner of the vehicle or if you have previously used another company’s
intake/filter, you must have the vehicle inspected by a dealer (who also is authorized to sell new
vehicles), so that we can be sure that the engine was in good condition prior to installing an
S&B product. The dealer must confirm that the vehicle's engine was in good condition by placing the text listed below on a work order (or other official paperwork) in order to be covered by S&B's Engine Protection Limited Warranty. In the event you did not get your vehicle inspected prior to installing the S&B intake kit, S&B will test your filter in our climate controlled lab according to the ISO 5011 Test Standard. Upon receipt, the filter will be inspected to ensure it has not been damaged, cleaned, properly re-oiled and tested at the max CFM of the vehicle. If the efficiency rate is greater than 99%, the filter will be deemed as working properly and no claim will be paid.
“An inspection of the engine components for the vehicle listed was done, and it has found that
there is no evidence of damaged components due to debris bypassing the vehicle’s air filter.
This includes but is not limited to damaged to turbo blades (if applicable) and the cylinder walls.
I have also inspected the vehicle and have not found any evidence that a programmer or tuner
was previously used on the vehicle.”
Is the engine warranty still valid if a tuner and/or programmer has been used on my vehicle?
S&B's engine warranty is still valid if you have altered the software of your vehicle; however, the engine warranty will only cover damaged to a turbo. S&B must make this change in our engine warranty when the vehicle's software has been altered because there are just too many situations where S&B might be incorrectly blamed for damage caused by making a change in the vehicle's software.
If you are a crook, read the following.
S&B can provide an engine warranty such as this because we test our filters and know that our filters will properly protect your engine. Unfortunately, there are always those individuals who try and take advantage of a situation. If S&B pays a claim for your vehicle and you knowingly conceal that the truck was previously owned, used a competitor's intake, or you did not disclose that the vehicle's software had been modified, you will be required to reimburse S&B 10 times the amount S&B paid to repair your vehicle plus any attorneys fees required to resolve the matter. Prior to S&B paying a claim, you will be required to sign a document indicating that you agree to provide S&B with any and all records (credit card bills, vehicle information, receipts, etc) requested if S&B suspects that your claim is fraudulent and decides to investigate the matter.
What will S&B do if I encounter a problem with a dealer?
S&B will expeditiously reimburse our customer for the cost of the repair if a dealer denies the
warranty repair as a result of a claim that the S&B intake kit or OE replacement filter caused the
damage to your engine/vehicle. In order to receive reimbursement, S&B requires each of the
Documentation from the dealer: Provide written documentation from the dealer where the
dealer faults the S&B intake or filter for the required repair work or refusal of warranty
Obtain the damaged parts: You or the dealer must provide S&B with all the allegedly
damaged parts. Many states have laws requiring the dealer to retain all replaced parts until
receiving consent from the consumer to dispose of the parts. S&B will pay for the shipping
costs to receive these parts.
Proof of purchase: You will need to provide proof of purchase of S&B products and your
assistance in helping us as we investigate the claim.
Original Purchaser of Vehicle & Prior Use: Provide proof that you are the original owner of
the vehicle. You must also indicate that no other intake kit or filter (other than stock) has
been used on your vehicle and that the vehicle’s programming has never been changed with
a tuner or programmer.
Upon completion of steps 1-4 referenced above, S&B will contact the dealer to investigate their
claim and one of the following three (3) things will occur.
Dealer reverses its position & covers the repair cost: S&B manufactures products that have
been used by the OE manufacturers themselves, so we are very familiar with the testing
requirements. We subject our products to many of the same tests in our 1/2 million dollar,
climate controlled test lab. In this lab, we test our products to the ISO 5011 International Test
Standard which is the same standard used by virtually all the OEs including Chrysler,
Toyota, General Motors, etc. When S&B presents these facts, the dealer may reverse its
position and cover your repair cost.
S&B pays for repairs & pursues dealer legally: Although there are laws to protect your rights
(Magnuson-Moss Warranty Act was passed to protect the consumer’s right to purchase
parts not made by an OE), in rare cases, some dealerships attempt to use simply the
presence of an intake kit or OE replacement filter to deny a legitimate warranty claim and
instead force the consumer to cover the cost of the repair. Some less scrupulous dealers
leverage the consumer’s need to get their vehicle back on the road, in order to get the
consumer to cover the cost of the repair. S&B will not sit back and let this happen. We
will cover the cost of the repair and then initiate litigation against the dealer to recoup our
S&B denies your claim & aids in dealer discussions: If S&B determines not enough evidence
was provided to support your claim, we reserve the right to reject the claim and will do our
absolute best to assist you in your negotiations with the dealer.
In the unlikely event you have an issue with your dealer, S&B will go above and beyond to help
you resolve the issue quickly and effectively. You can reach us at 909.947.0015 option 4 or via email at firstname.lastname@example.org.
The information contained in this warranty page and on this web site is subject to change without notice.